AccuCold FS407LBI7PLUSADA User Manual download pdf (Page 12)

Traceable thermometer/alarm

Every MED unit is equipped with a Traceable

Thermometer/Alarm that simultaneously displays

minimum, maximum and current interior

temperatures and provides a visual and audible

signal when the temperature inside the unit falls

outside the set temperature range.

(MED models):

The temperature sensor, or probe, is enclosed in

a glycol-filled bottle that you insert into the

location to be monitored, such as inside a

refrigerator or freezer, once the unit has been

programmed. The thermometer/alarm itself can

be attached to the door of the unit with the

magnet on the back, or it can be placed on a

convenient table or shelf.

Power to the Traceable Thermometer/Alarm is supplied with a lithium iron disulfide

battery with a 10-year shelf life. When it is inserted correctly, the unit will beep and all

segments of the LCD display will be temporarily activated. (Note that alarm

temperatures will have to be reset after replacing the battery.)

The temperature display can be switched between Celsius (°C) and Fahrenheit (°F)

by sliding the

°C/°F button located on the back of the unit.

Function of Controls:

MODE/RESET Key: Press ONCE to reset Max/Min temperature record. When the unit

is sounding an alarm, press ONCE to turn off the beeping sound.

HIGH/LOW Key: Press ONCE to display high alarm setting. Press TWICE to display

low alarm setting. Press THREE TIMES to display current temperature reading.

ALERT ON/OFF Key

Programming the Alarms:

: When the unit is sounding an alarm, press ONCE to turn off.

However, the High-Alarm or Low-Alarm will still flash until the temperature goes

back to normal or the Alarm function is turned off.

The thermometer displays the internal temperature of the unit being monitored, as

well as the maximum and minimum temperatures reached. The maximum and

minimum readings reflect the highest and lowest temperatures since the battery was

inserted or since the MODE/RESET key was last pressed. If the temperature rises

above or falls below the set temperature range, the alarm will sound. By default, the

high alarm temperature setting is 8°C (46.4°F) and the low alarm temperature setting

is 2°C (35.6°F). To reset these limits, follow these instructions:

High Alarm Temperature Setting: Press the HIGH/LOW key ONCE, then press

MODE/RESET to enter the High Alarm temperature setting mode. Use the Up and

Down arrows to adjust the temperature accordingly. Press MODE/RESET once

again to confirm the setting.

Low Alarm Temperature Setting: Press the HIGH/LOW key TWICE, then press

MODE/RESET to enter the Low Alarm temperature setting mode. Use the Up and

Down arrows to adjust the temperature accordingly. Press MODE/RESET ONCE to

confirm the setting.

1 2 ... 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

AccuCold FS407LBI7PLUSADA User Manual Page 12

Comments to this Manuals

Related products and manuals for Unknown AccuCold FS407LBI7PLUSADA